[h1]SPA Power/Status LED Blink Definitions[/h1]
[table]
[tr][td]State[/td][td] Description [/td][/tr]
[tr][td]ON[/td][td] LED remains solid on [/td][/tr]
[tr][td]OFF[/td][td] LED remains solid off [/td][/tr]
[tr][td]LONG (Long On)[/td][td] 3.0s on, 1s off continuously FAST 0.125s on, 0.125s off continuously [/td][/tr]
[tr][td]SLOW[/td][td] 0.5s on, 0.5s off continuously [/td][/tr]
[tr][td]VSLO (Very Slow)[/td][td] 1.0s on, 1.0s off continuously [/td][/tr]
[tr][td]HB (Heart Beat)[/td][td] 0.1s on, 0.1s off, 0.1s on, 1s off continuously [/td][/tr]
[tr][td]HB2 (Heart Beat 2)[/td][td] 0.1s on, 0.1s off, 0.1s on, 0.1s off, 0.1s on, 1.2s off continuously[/td][/tr]
[tr][td]ERR0 (Error 0)[/td][td] 0.5s on, 0.3s off, 0.1s on, 0.1s off, 0.1s on, 2s off continuously[/td][/tr]
[tr][td]ERR1 (Error 1)[/td][td] 0.1s on, 0.1s off, 0.1s on, 0.1s off, 0.5s on, 2s off continuously[/td][/tr]
[tr][td]ERR2 (Error 2)[/td][td] 0.1s on, 0.1s off, 0.1s on, 0.1s off, 0.5s on, 0.2s off, 0.5s on, 2s off continuously[/td][/tr]
[tr][td]SOS[/td][td]0.1s on, 0.1s off, 0.1s on, 0.1s off, 0.1s on, 0.1s off, 0.5s on, 0.2s off, 0.5s on, 0.2s off, 0.5s on, 0.2s off, 0.1s on, 0.1s off, 0.1s on, 0.1s off, 0.1s on, 0.1s off, 2s off continuously
3short-3long-3short[/td][/tr]
[/table]
[h1]SPA Power/Status LED Error Codes[/h1]
[table]
[tr][td]LED Blink Rate[/td][td]Description[/td][td]Handset Behavior [/td][td]Error Status Code [/td][/tr]
[tr][td]SLOW[/td][td]System InitializingSilent[/td][td]0000[/td][/tr]
[tr][td]OFF[/td][td]Normal Operation: Both Lines on hookNormal[/td][td]1000[/td][/tr]
[tr][td]ON[/td][td]Normal Operation: Either line off hookNormal[/td][td]1001[/td][/tr]
[tr][td]SLOW[/td][td]Downloading new firmwareSilent[/td][td]1100[/td][/tr]
[tr][td]FAST[/td][td]Writing firmware to flashSilent[/td][td]1101[/td][/tr]
[tr][td]SLOW[/td][td]Looking for DHCP ServerSilent[/td][td]2000[/td][/tr]
[tr][td]ERR1[/td][td]SPA is using last known good IP (backup IP)Normal[/td][td]2001[/td][/tr]
[tr][td]ERR2[/td][td]IP Address ConfilictSilent[/td][td]2002[/td][/tr]
[tr][td]SLOW[/td][td]No DHCP ServerSilent[/td][td]2999[/td][/tr]
[tr][td]SLOW[/td][td]Unknown DHCP ErrorSilent[/td][td]2999[/td][/tr]
[tr][td]ERR0[/td][td]No Ethernet Link Detected ErrorSilent[/td][td]5000[/td][/tr]
[tr][td]SOS[/td][td]Firmware Corrupted - Use SPA Recovery Tool to fixSilent[/td][/tr]
[/table]


Note: The Link LED will blink on transmit and receive (TX/RX) of packets. The LED will display solid off if no link is available. The LED will display solid on if link is up but no TX/RX activity is present.

__________________
Eric Chamberlain