This FREE service allows you to easily configure a Linksys (Sipura) SPA3000 or SPA3102 adaptor to work with Asterisk. It will work under the following circumstances:

• You must have admin-level access to the web interface of the SPA from your current location;
• You must be able to reach the web interface of the SPA device via port 80. If your SPA is behind a NAT, the Wizard will only work if the computer running this Wizard is also behind the same NAT device;
• A completely unlocked device (no locked ports) must be used as the wizard assumes both ports are open;
• Your Asterisk server and SPA3000/3102 should not be separated by a NAT device (i.e. they can be behind the same router/firewall);
• Your browser supports HTTPS;
• Your browser allows requested pop-up windows from Voxilla (temporarily disable your pop-up blocker).
• While not required we recommend setting the device to factory defaults prior to using the Wizard.

Please log in or register to read more...