This FREE service allows you to easily configure a Linksys SPA3000/3102 series adaptor for a number of different services with known good configurations. It will work under the following circumstances:

• You must have a Linksys SPA3000/3102. This Wizard will not work for other SPA devices;
• You must have admin-level access to the web interface of the SPA from your current location;
• You must be able to reach the web interface of the SPA device via port 80. If your SPA is behind a NAT, the Wizard will only work if the computer running this Wizard is also behind the same NAT device;
• A completely unlocked device (no locked ports) must be used as the wizard assumes both ports are open;
• Your provider provides the SIP username and password;
• Your browser supports HTTPS;
• Your browser allows requested pop-up windows from Voxilla (temporarily disable your pop-up blocker).
• You are running 2.0.11(GWg) or later revision of firmware. This version is required to allow you to make outgoing calls on "Gateway Providers". Download the latest release from Sipura Support.
• While not required we recommend setting the device to factory defaults prior to using the Wizard.
• You will need an account with SIP userid and password on one of the providers listed in Step 2.

Please log in or register to read more...